CEN/TC 138 Non-destructive testing，無損檢測

歐洲標準目錄

CEN/TC 138  Non-destructive testing，無損檢測 CEN ISO/TS 21432:2005 Non-destructive testing - Standards test method for determining residual stresses by neutron diffraction (ISO 21432:2005) 無損檢測 測定殘余應力的中子衍射方法 CEN/TR 14748:2004 Non-destructive testing - Methodology for qualification of non-destructive tests 無損檢測  無損檢測的鑒定方法 CEN/TS 15053:2005 Non-destructive testing - Recommendations for discontinuities-types in test specimens for examination 無損檢測  推薦的考試用檢測試樣中的不連續類型 CR 13935:2000 Non-destructive testing - Generic NDE data format model 無損檢測  普通NDE數據格式模型 EN 12084:2001 Non-destructive testing - Eddy current testing - General principles and guidelines EN 12084:2001/A1:2003 Non-destructive testing - Eddy current testing - General principles and guidelines 無損檢測  渦流檢測  總則與指南 EN 12223:1999 Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1 無損檢測  超聲檢測  1 號校準試塊規格 EN 12543-1:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method 無損檢測  無損檢測用工業X射線系統焦點特性  第 1 部分：掃描方法 EN 12543-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method 無損檢測  無損檢測用工業X射線系統焦點特性  第 2 部分：針孔射線照相方法 EN 12543-3:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method 無損檢測  無損檢測用工業X射線系統焦點特性  第 3 部分：狹縫射線照相方法 EN 12543-4:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method 無損檢測  無損檢測用工業X射線系統焦點特性  第 4 部分：邊緣方法 EN 12543-5:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes 無損檢測  無損檢測用工業X射線系統焦點特性  第 5 部分：小和微小焦點 X 射線管有效焦點尺寸的測量 EN 12544-1:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method 無損檢測  X射線管電壓的測量與評價  第 1 部分：電壓分壓器方法 EN 12544-2:2000 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method 無損檢測  X射線管電壓的測量與評價  第 2 部分：用厚過濾器的恒定校驗方法 EN 12544-3:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method 無損檢測  X射線管電壓的測量與評價  第 3 部分：頻譜方法 EN 12668-1:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments EN 12668-1:2000/A1:2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments 無損檢測  超聲檢測設備的性能與驗證  第 1 部分：儀器 EN 12668-2:2001 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes EN 12668-2:2001/A1:2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes 無損檢測  超聲檢測設備的性能與驗證  第 2 部分：探頭 EN 12668-3:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment EN 12668-3:2000/A1:2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment 無損檢測  超聲檢測設備的性能與驗證  第 3 部分：組合設備 EN 12679:1999 Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method 無損檢測  工業射線照相源尺寸的測定  射線照相方法 EN 13018:2001 Non-destructive testing - Visual testing - General principles EN 13018:2001/A1:2003 Non-destructive testing - Visual testing - General principles 無損檢測  目視檢測  總則 EN 13068-1:1999 Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties 無損檢測  射線透視檢測  第 1 部分：成像性能的定量測量 EN 13068-2:1999 Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices 無損檢測  射線透視檢測  第 2 部分：成像裝置長期穩定性的校驗 EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays 無損檢測  射線透視檢測  第 3 部分：金屬材料 X 和伽瑪射線透視檢測總則 EN 13184:2001 Non-destructive testing - Leak testing - Pressure change method EN 13184:2001/A1:2003 Non-destructive testing - Leak testing - Pressure change method 無損檢測  泄漏檢測  變壓方法 EN 13185:2001 Non-destructive testing - Leak testing - Tracer gas method EN 13185:2001/A1:2003 Non-destructive testing - Leak testing - Tracer gas method 無損檢測  泄漏檢測  示蹤氣體方法 EN 13192:2001 Non destructive testing - Leak testing - Calibration of reference leaks for gases EN 13192:2001/AC:2003 Non destructive testing - Leak testing - Calibration of reference leaks for gases 無損檢測  泄漏檢測  參考泄漏氣體的校準 EN 1330-1:1998 Non destructive testing - Terminology - Part 1: List of general terms 無損檢測  術語  第 1 部分：一般術語 EN 1330-10:2003 Non-destructive testing - Terminology - Part 10: Terms used in visual testing 無損檢測  術語  第 10 部分：目視檢測 EN 1330-2:1998 Non destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods 無損檢測  術語  第 2 部分：無損檢測方法通用術語 EN 1330-3:1997 Non-destructive testing - Terminology - Part 3: Terms used in industrial radiographic testing 無損檢測  術語  第 3 部分：工業射線照相檢測 EN 1330-4:2000 Non destructive testing - Terminology - Part 4: Terms used in ultrasonic testing 無損檢測  術語  第 4 部分：超聲檢測 EN 1330-5:1998 Non-destructive testing - Terminology - Part 5: Terms used in Eddy current testing 無損檢測  術語  第 5 部分：渦流檢測 EN 1330-7:2005 Non-destructive testing - Terminology - Part 7: Terms used in magnetic particle testing 無損檢測 術語 第 7 部分：磁粉檢測 EN 1330-8:1998 Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing 無損檢測  術語  第 8 部分：泄漏檢測 EN 1330-9:2000 Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing 無損檢測  術語  第 9 部分：聲發射檢測 EN 13477-1:2001 Non-destructive testing - Acoustic emission - Equipment characterisation - Part 1: Equipment description 無損檢測  聲發射  設備性能  第 1 部分：設備概述 EN 13477-2:2001 Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2: Verification of operating characteristic 無損檢測  聲發射  設備性能  第 2 部分：操作特性的驗證 EN 13554:2002 Non-destructive testing - Acoustic emission - General principles EN 13554:2002/A1:2003 Non-destructive testing - Acoustic emission - General principles 無損檢測  聲發射  總則 EN 13625:2001 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage 無損檢測  泄漏檢測  氣體泄漏測量儀的選擇指南 EN 13860-1:2003 Non destructive testing - Eddy current examination - Equipment characteristics and verification - Part 1: Instrument characteristics and verification 無損檢測  渦流檢測  設備性能與驗證  第 1 部分：儀器性能與驗證 EN 13860-2:2003 Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 2: Probe characteristics and verification 無損檢測  渦流檢測  設備性能與驗證  第 2 部分：探頭性能與驗證 EN 13860-3:2003 Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verification 無損檢測  渦流檢測  設備性能與驗證  第 3 部分：系統性能與驗證 EN 13925-1:2003 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous material - Part 1: General principles 無損檢測  多晶和非晶材料的X射線衍射  第 1 部分：總則 EN 13925-2:2003 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures 無損檢測  多晶和非晶材料的X射線衍射  第 2 部分：工藝規程 EN 13925-3:2005 Non destructive testing - X ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments 無損檢測  多晶和非晶材料的X射線衍射  第 3 部分：儀器 EN 13927:2003 Non-destructive testing - Visual testing - Equipment 無損檢測  目視檢測  設備 EN 14096-1:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control 無損檢測  射線照相膠片數字系統的質量鑒定  第 1 部分：定義、像質參數的定量測量、標準參考膠片和定量控制 EN 14096-2:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements 無損檢測  射線照相膠片數字系統的質量鑒定  第 2 部分：最低要求 EN 14127:2004 Non-destructive testing - Ultrasonic thickness measurement 無損檢測  超聲測厚 EN 14584:2005 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources 無損檢測  聲發射  金屬壓力設備調試期檢測  AE源的平面定位 EN 14784-1:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems 無損檢測  存儲式磷成像板工業計算機射線照相  第1 部分：系統分類 EN 14784-2:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays 無損檢測  存儲式磷成像板工業計算機射線照相  第2 部分：金屬材料X射線和伽瑪射線檢測總則 EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors 無損檢測  泄漏檢測  質譜檢漏儀的性能 EN 15305:2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment EN 15495:2007 Non Destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources EN 1593:1999 Non-destructive testing - Leak testing - Bubble emission techniques EN 1593:1999/A1:2003 Non-destructive testing - Leak testing - Bubble emission techniques 無損檢測  泄漏檢測  氣泡技術 EN 1779:1999 Non-destructive testing - Leak testing - Criteria for method and technique selection EN 1779:1999/A1:2003 Non-destructive testing - Leak testing - Criteria for method and technique selection 無損檢測  泄漏檢測  方法和技術選擇準則 EN 25580:1992 Non-destructive testing - Industrial radiographic illuminators - Minimum requirements (ISO 5580:1985) 無損檢測  工業射線照相觀片燈  最低要求 EN 27963:1992 Welds in steel - Calibration block No. 2 for ultrasonic examination of welds (ISO 7963:1985) 鋼焊縫  焊縫超聲檢測用 2 號校準試塊 EN 444:1994 Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays 無損檢測  金屬材料 X 和伽瑪射線照相檢測總則 EN 462-1:1994 Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value 無損檢測  射線照相底片像質  第 1 部分：線型像質計  像質值的測定 EN 462-2:1994 Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image quality value 無損檢測  射線照相底片像質  第 2 部分：階梯孔型像質計  像質值的測定 EN 462-3:1996 Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes for ferrous metals 無損檢測  射線照相底片像質  第 3 部分：黑色金屬像質級別 EN 462-4:1994 Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables 無損檢測  射線照相底片像質  第 4 部分：像質值和像質表的實驗評價 EN 462-5:1996 Non-destructive testing - Image quality of radiographs - Part 5: Image quality indicators (duplex wire type), determination of image unsharpness value 無損檢測  射線照相底片像質  第 5 部分：雙線型像質計  圖像不清晰度的測定 EN 473:2008 Non destructive testing - Qualification and certification of NDT personnel - General principles 無損檢測  NDT人員資格鑒定與認證  總則 EN 571-1:1997 Non destructive testing - Penetrant testing - Part 1: General principles 無損檢測  滲透檢測  第 1 部分：總則 EN 583-1:1998 Non-destructive testing - Ultrasonic examination - Part 1: General principles EN 583-1:1998/A1:2003 Non-destructive testing - Ultrasonic examination - Part 1: General principles 無損檢測  超聲檢測  第 1 部分：總則 EN 583-2:2001 Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting 無損檢測  超聲檢測  第 2 部分：靈敏度與測距調整 EN 583-3:1997 Non-destructive testing - Ultrasonic examination - Part 3: Transmission technique 無損檢測  超聲檢測  第 3 部分：穿透技術 EN 583-4:2002 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface EN 583-4:2002/A1:2003 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface 無損檢測  超聲檢測  第 4 部分：垂直于表面的不連續的檢測 EN 583-5:2000 Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities EN 583-5:2000/A1:2003 Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities 無損檢測  超聲檢測  第 5 部分：不連續的定性與定量 EN 583-6:2008 Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities 無損檢測  超聲檢測  第 6 部分：用衍射聲時技術檢測和定量不連續 EN 584-1:1994 Non destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography 無損檢測  工業射線照相膠片  第 1 部分：工業射線照相膠片系統的分類 EN 584-2:1996 Non destructive testing - Industrial radiographic film - Part 2: Control of film processing by means of reference values 無損檢測  工業射線照相膠片  第 2 部分：用參考值方法控制膠片處理 EN ISO 12706:2000 Non-destructive testing - Terminology - Terms used in penetrant testing (ISO 12706:2000) 無損檢測  術語  滲透檢測 EN ISO 12718:2008 Non-destructive testing - Eddy current testing - Vocabulary (ISO 12718:2008) EN ISO 15548-1:2008 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification (ISO 15548-1:2008) EN ISO 15548-2:2008 Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification (ISO 15548-2:2008) EN ISO 15548-3:2008 Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification (ISO 15548-3:2008) EN ISO 3059:2001 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2001) 無損檢測  滲透檢測和磁粉檢測  觀察條件 EN ISO 3452-2:2000 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2000) 無損檢測  滲透檢測  第 2 部分：滲透材料的檢驗 EN ISO 3452-3:1998 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998) EN ISO 3452-3:1998/AC:2001 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998) 無損檢測  滲透檢測  第 3 部分：參考試塊 EN ISO 3452-4:1998 Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998) 無損檢測  滲透檢測  第 4 部分：設備 EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008) EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures EN ISO 9934-1:2001 Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2001) EN ISO 9934-1:2001/A1:2003 Non-destructive testing - Magnetic particles testing - Part 1: General principles (ISO 9934-1:2003) 無損檢測  磁粉檢測  第 1 部分：總則 EN ISO 9934-2:2002 Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2002) 無損檢測  磁粉檢測  第 2 部分：檢測介質 EN ISO 9934-3:2002 Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2002) 無損檢測  磁粉檢測  第 3 部分：設備