亚洲线精品一区二区三区八戒,国产乱子伦视频大全,色丁香五月婷婷

國際標準目錄

ISO/TC 17 Steel，鋼

ISO 4986:1992
Steel castings -- Magnetic particle inspection
鑄鋼件磁粉檢測

ISO 4987:1992
Steel castings -- Penetrant inspection
鑄鋼件滲透檢測

ISO 4992-1:2006
Steel castings -- Ultrasonic examination -- Part 1: Steel castings for general purposes

ISO 4992-2:2006
Steel castings -- Ultrasonic examination -- Part 2: Steel castings for highly stressed components

ISO 4993:1987
Steel castings -- Radiographic inspection
鑄鋼件射線照相檢測

ISO 5948:1994
Railway rolling stock material -- Ultrasonic acceptance testing
鐵路車輛材料超聲驗收檢測

ISO 6933:1986
Railway rolling stock material -- Magnetic particle acceptance testing
鐵路車輛材料磁粉驗收檢測

ISO 9302:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Electromagnetic testing for verification of hydraulic leak-tightness
承壓無縫和焊接（埋弧焊除外）鋼管驗證水壓密封性的電磁檢測

ISO 9303:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of longitudinal imperfections
承壓無縫和焊接（埋弧焊除外）鋼管探測縱向缺欠的全周超聲檢測

ISO 9304:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Eddy current testing for the detection of imperfections
承壓無縫和焊接（埋弧焊除外）鋼管探測缺欠的渦流檢測

ISO 9305:1989
Seamless steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of transverse imperfections
承壓無縫鋼管探測橫向缺欠的全周超聲檢測

ISO 9402:1989
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections
承壓無縫和焊接（埋弧焊除外）鋼管探測鐵磁性鋼管縱向缺欠的全周磁換能器（漏磁）檢測

ISO 9598:1989
Seamless steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections
承壓無縫鋼管探測鐵磁性鋼管橫向缺欠的全周磁換能器（漏磁）檢測

ISO 9764:1989
Electric resistance and induction welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal imperfections
承壓電阻焊和感應焊鋼管探測焊縫縱向缺欠的超聲檢測

ISO 9765:1990
Submerged arc-welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections
承壓埋弧焊鋼管探測焊縫縱向和（或）橫向缺欠的超聲檢測

ISO 10124:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections
承壓無縫和焊接（埋弧焊除外）鋼管探測分層缺欠的超聲檢測

ISO 10332:1994
Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the verification of hydraulic leak-tightness
承壓無縫和焊接（埋弧焊除外）鋼管驗證水壓密封性的超聲檢測

ISO 10543:1993
Seamless and hot-stretch-reduced welded steel tubes for pressure purposes -- Full peripheral ultrasonic thickness testing
承壓無縫和熱拉縮徑焊鋼管全周超聲測厚

ISO 11484:1994
Steel tubes for pressure purposes -- Qualification and certification of non-destructive testing (NDT) personnel
承壓鋼管無損檢測人員資格鑒定與認證

ISO 11496:1993
Seamless and welded steel tubes for pressure purposes -- Ultrasonic testing of tube ends for the detection of laminar imperfections
承壓無縫和焊接鋼管探測管端分層缺欠的超聲檢測

ISO 11971:2008
Steel and iron castings -- Visual examination of surface quality
鑄鋼件表面質量的目視檢測

ISO 12094:1994
Welded steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes
承壓焊接鋼管探測焊接管用帶（板）材中分層缺欠的超聲檢測

ISO 12095:1994
Seamless and welded steel tubes for pressure purposes -- Liquid penetrant testing
承壓無縫和焊接鋼管滲透檢測

ISO 12096:1996
Submerged arc-welded steel tubes for pressure purposes -- Radiographic testing of the weld seam for the detection of imperfections
承壓埋弧焊鋼管探測焊縫缺欠的射線照相檢測

ISO 13663:1995
Welded steel tubes for pressure purposes -- Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections
承壓焊接鋼管探測焊縫附近分層缺欠的超聲檢測

ISO 13664:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube ends for the detection of laminar imperfections
承壓無縫和焊接鋼管探測管端分層缺欠的磁粉檢測

ISO 13665:1997
Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube body for the detection of surface imperfections
承壓無縫和焊接鋼管探測管體表面缺欠的磁粉檢測

ISO 17577:2006
Steel -- Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm

國際標準目錄

ISO/TC 42 Photography，照相術

ISO 5-1:1984
Photography -- Density measurements -- Part 1: Terms, symbols and notations
照相術 密度測量第 1 部分：術語、符號和標志
ISO 5-1:2009
Photography and graphic technology -- Density measurements -- Part 1: Geometry and functional notation

ISO 5-2:2001
Photography -- Density measurements -- Part 2: Geometric conditions for transmission density
照相術 密度測量第 2 部分：透射密度的幾何條件
ISO 5-2:2009
Photography and graphic technology -- Density measurements -- Part 2: Geometric conditions for transmittance density

ISO 5-3:1995
Photography -- Density measurements -- Part 3: Spectral conditions
照相術 密度測量第 3 部分：光譜條件
ISO 5-3:2009
Photography and graphic technology -- Density measurements -- Part 3: Spectral conditions

ISO 5-4:1995
Photography -- Density measurements -- Part 4: Geometric conditions for reflection density
照相術 密度測量第 4 部分：反射密度的幾何條件
ISO 5-4:2009
Photography and graphic technology -- Density measurements -- Part 4: Geometric conditions for reflection density

ISO 5655:2000
Photography -- Industrial radiographic films (roll and sheet) and metal intensifying screens -- Dimensions
照相術 工業射線照相膠片（卷和張）和金屬增感屏尺寸

ISO 7004:2002
Photography -- Industrial radiographic films -- Determination of ISO speed, ISO average gradient and ISO gradients G2 and G4 when exposed to X- and gamma-radiation
照相術 工業射線照相膠片 X 和伽瑪射線曝光時的 ISO 感光速度、ISO 平均梯度及 ISO 梯度 G2 和 G4 的測定

ISO 14807:2001
Photography -- Transmission and reflection densitometers -- Method for determining performance

國際標準目錄

ISO/TC 44 Welding and allied processes，焊接及相關工藝

ISO 10675-1:2008
Non-destructive testing of welds -- Acceptance levels for radiographic testing -- Part 1: Steel, nickel, titanium and their alloys

ISO 17635:2003
Non-destructive testing of welds -- General rules for fusion welds in metallic materials
焊縫無損檢測 金屬材料熔焊通則

ISO 17636:2003
Non-destructive testing of welds -- Radiographic testing of fusion-welded joints
焊縫無損檢測 熔焊接頭射線照相檢測

ISO 17637:2003
Non-destructive testing of welds -- Visual testing of fusion-welded joints
焊縫無損檢測 熔焊接頭目視檢測

ISO 17638:2003
Non-destructive testing of welds -- Magnetic particle testing
焊縫無損檢測 磁粉檢測

ISO 17640:2005
Non-destructive testing of welds -- Ultrasonic testing of welded joints
焊縫無損檢測 焊接接頭超聲檢測

ISO 17643:2005
Non-destructive testing of welds -- Eddy current testing of welds by complex-plane analysis
焊縫無損檢測 基于復平面分析的焊縫渦流檢測

ISO 22825:2006
Non-destructive testing of welds -- Ultrasonic testing -- Testing of welds in austenitic steels and nickel-based alloys
焊縫無損檢測 超聲檢測 奧氏體鋼和鎳基合金焊縫檢測

ISO 23277:2006
Non-destructive testing of welds -- Penetrant testing of welds -- Acceptance levels
焊縫無損檢測 焊縫滲透檢測 驗收等級

ISO 23278:2006
Non-destructive testing of welds -- Magnetic particle testing of welds -- Acceptance levels
焊縫無損檢測 焊縫磁粉檢測 驗收等級

ISO 23279:2007
Non-destructive testing of welds -- Ultrasonic testing -- Characterization of indications in welds
焊縫無損檢測 超聲檢測 焊縫中指示的特征

國際標準目錄

ISO/TC 79 Light metals and their alloys，輕金屬及其合金

ISO 2128:1976
Anodizing of aluminium and its alloys -- Determination of thickness of anodic oxide coatings -- Non-destructive measurement by split-beam microscope
鋁及其合金的陽極氧化處理陽極氧化層厚度測定用分束顯微鏡作無損測量

ISO 9915:1992
Aluminium alloy castings -- Radiography testing
鋁合金鑄件射線照相檢測

ISO 9916:1991
Aluminium alloy and magnesium alloy castings -- Liquid penetrant inspection
鋁合金和鎂合金鑄件滲透檢測

ISO 10049:1992
Aluminium alloy castings -- Visual method for assessing the porosity
鋁合金鑄件評估孔隙度的目視方法

國際標準目錄

ISO/TC 85 Nuclear energy，核能

ISO 1757:1996
Personal photographic dosemeters
個人照相劑量?jī)x

ISO 2855:1976
Radioactive materials -- Packagings -- Test for contents leakage and radiation leakage
放射性材料包裝內存物泄漏和輻射泄漏的檢測

ISO 2919:1999
Radiation protection -- Sealed radioactive sources -- General requirements and classification
輻射防護 密封放射源一般要求和分類

ISO 3999:2004Radiation protection -- Apparatus for industrial gamma radiography -- Specifications for performance, design and tests
輻射防護 工業伽瑪射線照相裝置性能、設計和檢驗規范

ISO/TR 4826:1979
Sealed radioactive sources -- Leak test methods
密封放射源泄漏檢測方法

ISO 7212:1986
Enclosures for protection against ionizing radiation -- Lead shielding units for 50 mm and 100 mm thick walls
電離輻射防護欄 50 mm 和 100 mm 厚鋁屏蔽裝置

ISO 9978:1992
Radiation protection -- Sealed radioactive sources -- Leakage test methods
輻射防護 密封放射源泄漏檢測方法

ISO 11934:1997
X and gamma radiation -- Indirect- or direct- reading capacitor-type pocket dosemeters
X 和伽瑪射線非直讀或直讀式電容型袖珍輻射劑量?jī)x

國際標準目錄

ISO/TC 107 Metallic and other inorganic coatings，金屬及其他無機覆蓋層

ISO 1463:2003
Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method
金屬和氧化物覆蓋層覆蓋層厚度測量顯微鏡方法

ISO 2064:1996
Metallic and other inorganic coatings -- Definitions and conventions concerning the measurement of thickness
金屬和其他無機覆蓋層厚度測量的定義和慣例

ISO 2178:1982
Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness -- Magnetic method
磁性基體上非磁性覆蓋層覆蓋層厚度測量磁性方法

ISO 2360:2003
Non-conductive coatings on non-magnetic electrically conductive basis materials -- Measurement of coating thickness -- Amplitude-sensitive eddy current method
非磁性導電基體上非導電覆蓋層覆蓋層厚度測量調幅感應渦流方法

ISO 2361:1982
Electrodeposited nickel coatings on magnetic and non-magnetic substrates -- Measurement of coating thickness -- Magnetic method
磁性和非磁性基體上鎳電鍍層鍍層厚度測量磁性方法

ISO 3497:2000
Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
金屬覆蓋層覆蓋層厚度測量 X 射線光譜方法

ISO 3543:2000
Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method
金屬和非金屬覆蓋層厚度測量 β 背散射方法

ISO 3868:1976
Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiple-beam interferometry method
金屬和其他無機覆蓋層覆蓋層厚度測量裴索多光束干涉方法

ISO 3882:1986
Metallic and other non-organic coatings -- Review of methods of measurement of thickness
金屬和其他無機覆蓋層厚度測量方法綜述

ISO 4518:1980
Metallic coatings -- Measurement of coating thickness -- Profilometric method
金屬覆蓋層覆蓋層厚度測量輪廓儀方法

ISO 4522-1:1985
Metallic coatings -- Test methods for electrodeposited silver and silver alloy coatings -- Part 1: Determination of coating thickness
金屬覆蓋層銀和銀合金電鍍層厚度檢測方法第 1 部分：鍍層厚度測定

ISO 4524-1:1985
Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 1: Determination of coating thickness
金屬覆蓋層金和金合金電鍍層厚度檢測方法第 1 部分：鍍層厚度測定

ISO 9220:1988
Metallic coatings -- Measurement of coating thickness -- Scanning electron microscope method
金屬覆蓋層覆蓋層厚度測量掃描電子顯微鏡方法

國際標準目錄

ISO/TC 123 Plain bearings，滑動軸承

ISO 4386-1:1992
Plain bearings -- Metallic multilayer plain bearings -- Part 1: Non-destructive ultrasonic testing of bond
滑動軸承金屬多層滑動軸承第 1 部分：聯結處超聲無損檢測

ISO 4386-3:1992
Plain bearings -- Metallic multilayer plain bearings -- Part 3: Non-destructive penetrant testing
滑動軸承金屬多層滑動軸承第 3 部分：滲透無損檢測

國際標準目錄

ISO/TC135 Non-destructive testing，無損檢測

ISO 2400:1972
Welds in steel -- Reference block for the calibration of equipment for ultrasonic examination
鋼焊縫超聲檢測設備校準用參考試塊

ISO 3057:1998
Non-destructive testing -- Metallographic replica techniques of surface examination
無損檢測 表面檢測的金相復型技術

ISO 3058:1998
Non-destructive testing -- Aids to visual inspection -- Selection of low-power magnifiers
無損檢測 目視檢測輔助設備低倍放大鏡的選擇

ISO 3059:2001
Non-destructive testing -- Penetrant testing and magnetic particle testing - Viewing conditions
無損檢測 滲透檢測和磁粉檢測 觀察條件

ISO 3452-1:2008
Non-destructive testing -- Penetrant testing -- Part 1: General principles
無損檢測 滲透檢測 第 1 部分：總則

ISO 3452-2:2006
Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials
無損檢測 滲透檢測 第 2 部分：滲透材料的檢驗

ISO 3452-3:1998
Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks
無損檢測 滲透檢測 第 3 部分：參考試塊

ISO 3452-4:1998
Non-destructive testing -- Penetrant testing -- Part 4: Equipment
無損檢測 滲透檢測 第 4 部分：設備

ISO 3452-5:2008
Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degrees C
無損檢測 滲透檢測 第 5 部分：50 oC 以上的高溫滲透檢測

ISO 3452-6:2008
Non-destructive testing -- Penetrant testing -- Part 6: Penetrant testing at temperatures lower than 10 degrees C
無損檢測 滲透檢測 第 6 部分：10 oC 以下的低溫滲透檢測

ISO 3530:1979
Vacuum technology -- Mass-spectrometer-type leak-detector calibration
真空技術 質譜檢漏儀校準

ISO 5576:1997
Non-destructive testing -- Industrial X-ray and gamma-ray radiology -- Vocabulary
無損檢測 工業 X 射線和伽瑪射線照相詞匯

ISO 5577:2000
Non-destructive testing -- Ultrasonic inspection -- Vocabulary
無損檢測 超聲檢測 詞匯

ISO 5579:1998
Non-destructive testing -- Radiographic examination of metallic materials by X- and gamma rays -- Basic rules
無損檢測 金屬材料 X 和伽瑪射線照相檢測 基本規則

ISO 5580:1985
Non-destructive testing -- Industrial radiographic illuminators -- Minimum requirements
無損檢測 工業射線照相觀片燈最低要求

ISO 7963:2006
Non-destructive testing -- Ultrasonic testing --- Specification for calibration block No. 2
無損檢測 超聲檢測 2號校準試塊技術條件

ISO 9712:2005
Non-destructive testing -- Qualification and certification of personnel
無損檢測 人員資格鑒定與認證

ISO 9934-1:2001
Non-destructive testing -- Magnetic particle testing -- Part 1: General principles
無損檢測 磁粉檢測 第 1 部分：總則

ISO 9934-2:2002
Non-destructive testing -- Magnetic particle testing -- Part 2: Detection media
無損檢測 磁粉檢測 第 2 部分：檢測介質

ISO 9934-3:2002
Non-destructive testing -- Magnetic particle testing -- Part 3: Equipment
無損檢測 磁粉檢測 第 3 部分：設備

ISO 10375:1997
Non-destructive testing -- Ultrasonic inspection -- Characterization of search unit and sound field
無損檢測 超聲檢測 探頭及其聲場的表征

ISO 11537:1998
Non-destructive testing -- Thermal neutron radiographic testing -- General principles and basic rules
無損檢測 熱中子輻射照相檢測 總則和基本規則

ISO 11699-1:2008
Non-destructive testing -- Industrial radiographic film -- Part 1: Classification of film systems for industrial radiography
無損檢測 工業射線照相膠片第 1 部分：工業射線照相膠片系統的分類

ISO 11699-2:1998
Non-destructive testing -- Industrial radiographic films -- Part 2: Control of film processing by means of reference values
無損檢測 工業射線照相膠片第 2 部分：用參考值方法控制膠片處理

ISO 12706:2000
Non-destructive testing -- Terminology - Terms used in penetrant testing
無損檢測 術語滲透檢測

ISO 12710:2002
Non-destructive testing -- Ultrasonic inspection -- Evaluating electronic characteristics of ultrasonic test instruments
無損檢測 超聲檢測 超聲檢測儀電特性的評定

ISO 12713:1998
Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers
無損檢測 聲發射檢測 換能器的一級校準

ISO 12714:1999
Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors
無損檢測 聲發射檢測 聲發射傳感器的二級校準

ISO 12715:1999
Ultrasonic non-destructive testing -- Reference blocks and test procedures for the characterization of contact search unit beam profiles
超聲無損檢測 表征接觸式探頭聲束截面性能的參考試塊和測試規程

ISO 12716:2001
Non-destructive testing -- Acoustic emission inspection -- Vocabulary
無損檢測 聲發射檢測 詞匯

ISO 12718:2008
Non-destructive testing -- Eddy current testing -- Vocabulary
無損檢測 渦流檢測 詞匯

ISO 12721:2000
Non-destructive testing -- Thermal neutron radiographic testing -- Determination of beam L/D ratio
無損檢測 熱中子輻射照相檢測 中子束 L/D 的測定

ISO 14096-1:2005
Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
無損檢測 射線照相膠片數字系統的質量鑒定第 1 部分：定義、像質參數的定量測量、標準參考膠片和定量控制

ISO 14096-2:2005
Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 2: Minimum requirements
無損檢測 射線照相膠片數字系統的質量鑒定第 2 部分：最低要求

ISO 15548-1:2008
Non-destructive testing -- Equipment for eddy current examination -- Part 1: Instrument characteristics and verification
無損檢測 渦流檢測設備第1部分：儀器特性與驗證

ISO 15548-2:2008
Non-destructive testing -- Equipment for eddy current examination -- Part 2: Probe characteristics and verification
無損檢測 渦流檢測設備第2部分：探頭特性與驗證

ISO 15548-3:2008
Non-destructive testing -- Equipment for eddy current examination -- Part 3: System characteristics and verification
無損檢測 渦流檢測設備第3部分：系統特性與驗證

ISO 15549:2008
Non-destructive testing -- Eddy current testing -- General principles
無損檢測 渦流檢測 總則

ISO 15708-1:2002
Non-destructive testing -- Radiation methods -- Computed tomography -- Part 1: Principles
無損檢測 輻射方法計算機層析成像第 1 部分：原則

ISO 15708-2:2002
Non-destructive testing -- Radiation methods -- Computed tomography -- Part 2: Examination practices
無損檢測 輻射方法計算機層析成像第 2 部分：檢測方法

ISO/TS 18173:2005
Non-destructive testing -- General terms and definitions
無損檢測 通用術語和定義

ISO 18175:2004
Non-destructive testing -- Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments
無損檢測 不用電子測量?jī)x器評定超聲脈沖回波檢測系統工作特性

ISO 19232-1:2004
Non-destructive testing -- Image quality of radiographs -- Part 1: Image quality indicators (wire type) -- Determination of image quality value
無損檢測 射線照相底片像質 第1部分：線型像質計 像質指數的測定

ISO 19232-2:2004
Non-destructive testing -- Image quality of radiographs -- Part 2: Image quality indicators (step/hole type) -- Determination of image quality value
無損檢測 射線照相底片像質 第2部分：階梯孔型像質計 像質指數的測定

ISO 19232-3:2004
Non-destructive testing -- Image quality of radiographs -- Part 3: Image quality classes for ferrous metals
無損檢測 射線照相底片像質 第3部分：黑色金屬像質分類

ISO 19232-4:2004
Non-destructive testing -- Image quality of radiographs -- Part 4: Experimental evaluation of image quality values and image quality tables
無損檢測 射線照相底片像質 第4部分：像質指數和像質表的實驗評價

ISO 19232-5:2004
Non-destructive testing -- Image quality of radiographs -- Part 5: Image quality indicators (duplex wire type) -- Determination of image unsharpness value
無損檢測 射線照相底片像質 第5部分：雙線型像質計 圖像不清晰度的測定

ISO 20807:2004
Non-destructive testing -- Qualification of personnel for limited application of non-destructive testing
無損檢測 有限應用范圍的無損檢測人員資格鑒定

ISO/TS 21432:2005
Non-destructive testing -- Standard test method for determining residual stresses by neutron diffraction
無損檢測 測定殘余應力的中子衍射方法

ISO/TS 22809:2007
Non-destructive testing -- Discontinuities in specimens for use in qualification examinations
無損檢測 資格考試用試樣中的不連續

ISO/TR 25107:2006
Non-destructive testing -- Guidelines for NDT training syllabuses
無損檢測 NDT培訓課程指南

ISO/TR 25108:2006
Non-destructive testing -- Guidelines for NDT personnel training organizations
無損檢測 NDT人員培訓機構指南

遠東無損檢測資訊網